爐排減速器ゴ136 8526 2969ギ常州市武鴻鍋爐輔機設備有限公司 風機機殼的組裝，機殼組裝時，應以轉子軸線為基準找正機殼的位置。機殼進風口或密封圈與葉輪進口圈的軸向插入深度S1和徑向間隙S2應調整到設備技術文件規定的范圍內。同時尚應使機殼后側板軸孔與主軸同軸，并不得碰刮。當設備技術文件無規定時，軸向插入深度應為葉輪外徑的10/1000，徑向間隙應均勻，其間隙值應為葉輪外徑的1.5/11000~3/1000(外徑小者取大值)高溫風機尚應預留熱膨脹量。In the case of the fan casing, the position of the rotor axis should be located at the axis of the rotor. The axial .ion depth of S1.the radial clearance S2 in the inlet of the casing inlet.the sealing ring.the impeller shall be adjusted to the range specified in the technical documentation. At the same time, there should be the case after the side shaft hole.shaft coaxial,.shall not touch scratch. When the equipment technical documents are not provided, the axial .ion depth should be 10/1000 of the outer diameter of the impeller, the radial clearance should be uniform,.the gap value should be 1.5/11000~3/1000 (outside diameter) of the impeller diameter of the high temperature air blower should be reserved.常州市武鴻鍋爐輔機設備有限公司 地址：江蘇省常州市武進區洛陽鎮虞橋章家頭50-1號 銷售電話：0519-88727780/ 88727580 傳 真：0519-88727880 手 機：13685262969 Q  Q ：2249080673 郵 箱：[email protected] 主動爐排片：www.cz-boiler.net. 鍋爐配件：www.whboiler.com. 爐排減速器：www.glfj.net. 翻斗卷筒軸：www.wh-boiler.com. 螺旋出渣機：www.cz-boiler.com.cn. 離心式熱油泵：www.wry006.com. 高溫導熱油泵：www.wry002.com. 導熱油泵配件：www.wry008.com. WRY導熱油泵：www.wry003.com. 耐腐蝕化工泵：www.wyryb.com. 出渣機配件：http://glboiler.cn.alibaba.com. 武研導熱油泵：http://wrypump.cn.alibaba.com. 2015.12.18 小陳