1. Introduion
The ALL to SDI Scaler Converter allows you to upscale Composite,VGA,DVI,HDMI signals to high definition video of SDI formats (HD-SDI SMPTE 292M.3G-SDI 424M/425M), then output to both ports at the same time.
2. Features
Ø Supports HDMI, DVI, VGA.Composite Video input signals;
Ø Supports two SDI output simultaneously;
Ø Supports SDI output distance up to 100 meters (3G-SDI),.200 meters (HD-SDI);
Ø Scales any input signal to the HD-SDI.3G-SDI output signals;
Ø Supports HDMI input timings: [email protected] ~ [email protected] & 480i [email protected] Hz;
Ø Supports VGA/DVI input timings: [email protected] ~1920×[email protected] Hz;
Ø Supports Composite Video input timings NTSC, PAL,SECAM;
Ø Supports Black screen signal output;
3. Package Contents
Ø ALL to SDI Scaler Converter 1pcs
Ø 12V/2.5A DC power adaptor 1pcs
Ø Operation Manual 1pcs
4. Specification
SDI Transmission Rates 2.970 Gbps, 1.485 Gbps
Video Bandwidth 165 MHz
Input Ports 1×HDMI (Type A conneor),
1×DVI with Audio
1x VGA with Audio
1×Composite with R/L
Output port 2×SDI (HD/3G-SDI),
SDI Cable Distance 3G/HD/up to 100/200 meters with
BELDEN 1694A cable
HDMI Cable Distance Input: 10 m, 8/12-bit
Input HDMI Timing Support [email protected], [email protected], [email protected], [email protected],
[email protected],[email protected],[email protected], [email protected],
[email protected], [email protected]/60, [email protected]/60,
[email protected]/25/30/50/60;
Input VGA/DVI Timing Support [email protected], [email protected], [email protected],
[email protected], [email protected],[email protected],
1920×[email protected]
Input Composite Support NTSC, PAL,SECAM
Output Timing Support SDI: SMPTE 292M (1.485 Gbit/s) &
SMPTE 424M/425M (2.970 Gbit/s)
ESD Proteion Human-body Model:
±8kV (air-gap discharge)
±4kV (conta discharge)
Dimensions 110mm (W)×288mm (D)×32 mm (H)
Weight 750 g
Chassis Material Metal
Operating Temperature 0?C~40?C / 32?F ~ 104?F
Storage temperature -20?C~60?C / -4?F ~ 140?F
Relative Humidity 20~90% RH (no condensation)
Power Consumption 5W
5. Operation.Fuions
5.1 Front panel
1. INPUT BOTTONS: Press these buttons to . the input source.
2. RESOLUTION BOTTONS: Press these buttons to . the SDI output resolution.
5.2 Rear panel
1. OUTPUT: The two SDI output is . you conne the SDI monitor with SDI cable for input source display.
2. Input: These slot is . you conne the HDMI/DVI/VGA/Composite source output from DVD, PS3,Set-top Box.Note Book.
3. DC 12V: Plug the 12V DC power supply into the unit.conne the adaptor to AC wall outlet.
4. ON/OFF: Power ON/OFF.
更多相關(guān)介紹:http://www.xinyad.com/index.php?_m=mod_produ&_a=prdlist&cap_id=108